Advantages of PCD & CBN Tool Grinder machine
The PCD & CBN Tool Grinder machine has been improved in four main areas:
1. The feed rail is a plastic guide rail or a rolling guide that is sporty.
2. The feed system is servo motor-ball screw nut transmission, which can reach the feed (can be divided in one grinding, rough grinding, fine grinding, delay, etc., and the amount and speed of each step can be Arbitrary setting) The feed repeat positioning accuracy is within 0.002mm.
3. The trimmer compensation is also the servo motor-ball screw nut transmission. The repeat positioning accuracy is 0.001mm. Therefore, the feed system can compensate for the trimming amount at the same time after trimming, so that the workpiece size is still stable after trimming.
4. The electrical system is a CNC system with a touch screen at the same time. Various grinding parameters and trimming parameters can be set on the screen. The operation is simple and clear, and the automatic grinding of the machine tool is realized. The automatic dressing improves the grinding quality and improves the machine tool efficiency. It can also realize one person and multiple machines, which greatly improves the overall efficiency. At the same time, the machine has a self-diagnosis function for easy maintenance.
Technical Parameters of PCD &CBN Tool Grinder machine
|
| The diameter of the Grinding wheel |
150mm |
| Power of grinding spindle |
3KW |
| RPM of Grinding Spindle |
0～3,000RPM |
| Changeable Clearance Angle |
-5°~25° |
| Grinding wheel center hole |
40mm |
| Spindle Center Height |
150mm |
|
| PLC Numerical Controlled Oscillation and Control on the Panel |
| Max. Oscillation Range |
30mm |
| Max. Oscillation Frequency |
60times/minute |
| Oscillation Position is Controlled by Screw and Starting |
From Center, Left, Right |
|
| Max Magnification of Optical Microscope |
4 times |
| Magnification of CCD Measuring System |
100times |
| 15Industrial Displayer |
15 “ |
| CCD Image Resolution |
1280*1024 |
|
| Quick Approach Withdraw and Precisely Feeding |
3mm/turn;0.5mm/turn |
| The compressor of Air Braking on Rotation Axis |
6bar |
| Longitudinal Transverse (X-Axis) controlled by PLC |
400mm |
| Horizontal Transverse (Y-Axis) Driven by Hand Wheel |
70mm |
| Rotation Transverse(B Axis) Driven by Hand |
360° |
| Linear Encoder Resolution (X-Axis and Y-Axis) |
0.001mm |
| Rotation Encoder Resolution (B Axis) |
0.010° |
|
| Coolant Tank with Filter Paper |
about70L |
| Electrical Supply |
12Kw |
| Voltage Requested |
380V/Three-phase /50Hz |
| Overall Dimensions L╳W╳H |
1700╳1150╳1970mm |
| Weight With Coolant Tank |
2000Kg |
